Choice Marine Boat Leveler

  • Boat leveler enables your boat to plane at speeds lower than natural planing speed. Choice marine offers the boat leveler with amazing Features. The hinges prevent most spray and can be used for transom or bottom mounting custom boating accessories.

    Below are some of the features which you need to check which buying the boat leveler:

    1. Solenoids: epoxy sealed, custom designed, and humidity resistant.
    2. Brackets: Knockout pins act as shear pins it tab strikes an object. Swivel type brackets allow cylinders to be mounted an adjusted to any angle.
    3. Motor: Resists temperature and amperage build-up. The motor is mounted with stainless steel nuts and bolts and is easily disassembled.  
    4. Trim Tabs: 12 gauge 304 stainless steel trim tabs are available in standard and custom lengths.
    5. Wiring: they are Color-coded wiring in 25' to 40' lengths with quick connects fittings, making installation easy.
    6. Cylinders: Impact resistant, eliminates high and low-pressure leaks, fiberglass reinforced nylon cylinders, two expanding type seals, plus O-ring.
    7. Motor Cover: high impact ABS plastic cover with a built-in oil reservoir. The cover protects the motor from occasional wash down.
    8. Rocker Type Controls: 2TP Micro switch with silver contact points adjust the tabs for maximum control and performance.
    9. Pump: Amperage doesn't exceed 16, the built-in bypass is factory set at 400 P.S.I. tolerance held to .00025.
    10. Hose: Rated at 2000 lb. burst pressure, 15' of a hose is supplied to your system.

    Visit for more details.